1000 Series : Downloading calibration factors

Modified on Tue, 02 Mar 2021 at 02:21 PM

It may sometimes be necessary to perform a backup of the calibration factors of the 1000 Series, for instance to keep a copy of previous factors prior to sending for calibration.

  1. Connect the 1000 Series to the computer using a USB Cable. Allow windows to detect the 1000 Series.
  2. Open the Transmille Calibrator Setup Utility. Instructions for installation can be found here : Installing the Transmille Calibrator Setup Utility.
  3. If the desired calibrator is the only Transmille unit connected to the computer it will be automatically detected during the start up scan that the software performs.

  4. The background screen of the application will change to a picture of the 1000 Series.


  5. Click the 'Calibration Factors' button from the Advanced Setup panel as highlighted.


  6. In the new window that appears, click the 'Load from Calibrator' button at the top of the screen.



  7.  The grid will begin to fill up with data that has been downloaded. Please wait until the progress bar has stopped increasing before proceeding.



  8. Once the progress bar has completed and the progress bar has disappeared, click 'Save to File' and save the file with a clear filename in a location you will remember.



  9. You have now successfully performed a backup of the calibration factors.


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article