8100 Series
The 8100 Series can be updated via USB to add new functionality for end users. It is recommended that USB updates are performed only by competent person...
Thu, 13 Sep, 2018 at 10:40 AM
The 8100 series features user update-able firmware to add new features and resolve issues without the need to return to a service centre. Depending upon...
Wed, 3 Mar, 2021 at 8:19 AM
Note - Application note applies to firmware version 1.0.7 onwards. The 8104 features a fully configurable ratio mode, allowing users to select the numbe...
Wed, 3 Mar, 2021 at 8:22 AM
Note - Application note applies to firmware version 1.0.7 onwards. To enter Ratio mode, select the function that the ratio is to be performed on (i.e. D...
Wed, 3 Mar, 2021 at 8:24 AM
Note - Application note applies to firmware version 1.0.7 onwards. In the ‘Ratio To Value’ mode, the multimeter dynamically takes measurements from the ...
Wed, 3 Mar, 2021 at 8:24 AM
To be detected by the 8100 Series any memory stick used must be formatted using the FAT32 File System. To format a memory stick to this file system, fir...
Wed, 3 Mar, 2021 at 8:25 AM
Transmille products are protected by an unlock code when shipped from the factory. This is for protection of both ourselves and our representatives/reseller...
Wed, 3 Mar, 2021 at 8:26 AM
If an update of the UI is interrupted (for example a power interruption) there is the possibility for the multimeter to display an error and not reach the m...
Wed, 3 Mar, 2021 at 8:26 AM
The 8100 Advanced Multimeter can be fully adjusted from the front panel, or over the remote interface. To enter Calibration Mode on the 8100 Series via the...
Tue, 7 Sep, 2021 at 3:56 PM
To adjust the 8100, first Enable Calibration Mode : 8100 : Entering Calibration Mode Select the desired range (for example, 100mV DC) and then press th...
Wed, 8 Sep, 2021 at 2:35 PM