-
Traceability on UKAS certificates issued by Transmille
-
Interpreting Extended Specifications
-
Returning Equipment to Transmille for Recalibration & Service
General (4)
General Support Enquiries and FAQ's
-
1000 Series : Updating Low Level Firmware on 1000 Series Calibrators
-
1000 Series : Updating Firmware via USB (Version 12.2.xx onwards) on 1000 Series Calibrators
-
1000 Series : Calibration & Verification of the 1000 Series
-
'Evaluation Period Expired' displayed on screen
-
Creating a Backup of Calibration Factors
-
3000A Series : Uploading/Restoring Calibration Factors
-
Reverting Earth-Neutral Wiring
-
3200B : Replacing Continuity Fuse
-
3200 A/B : Setting RCD Trip Threshold
-
4000 : Replacing the output protection fuses
-
4000 : Updating Low Level PIC Firmware (Legacy)
-
Updating 4000 Series to USB Updateable Firmware
-
4610M : Formatting a Memory Stick to FAT32 Format
-
4610M : Accessing Internal MicroSD Card
-
4610M - Running from MicroSD Card
-
8100 : UI Version History
-
8100 : Update Firmware via USB
-
8100 : Configuring Ratio Measurements (8104 Only)
-
Installing the Transmille Calibrator Setup Utility
-
Changing the High Voltage Timeout
-
Changing / Setting the High Voltage Limit
Software (Version 6) (18)
Software Solutions
-
Assigning/Removing Instruments to/from a Station
-
Adding/Removing/Merging Traceable Instrument Categories
-
Creating a Traceable Instrument from an Existing Inventory Item
-
Adding Adapters to ProSet and Printing on Certificates as Traceable Instruments
-
Adding Company logo to Certificates (Built In Format)
-
Brother Label Printer - ActiveX Error When Printing
-
Start A Calibration From The Priority List (Booked In Instruments Only - Requires ProCal-Track)
-
How To Recover Calibration Results
-
How to Start a Calibration from the Priority List (Booked In Instruments Only - Requires ProCal-Track)
-
How To Add Documents to an Instrument
-
How To Book In An Instrument That Has Been Calibrated Before
-
How To Book In An Instrument That Is New To The Laboratory
-
Adding a new Standard into ProSet (prior to V6.8)
-
Configuring Custom Certificate Templates (For ProCal)
-
Configuring Laboratory Address & Signatories