1000 Series

1000 Series : Updating Low Level Firmware on 1000 Series Calibrators
To add new functionality and resolve issues firmware updates are released for the 1000 Series periodically. Updating the firmware requires a programmer ...
Tue, 2 Mar, 2021 at 2:19 PM
1000 Series : Updating Firmware via USB (Version 12.2.xx onwards) on 1000 Series Calibrators
1) Download the USB Updater application attached to this solution. 2) Start the ds30 Secure Loader GUI utility, and select the appropriate COM port for ...
Tue, 2 Mar, 2021 at 2:19 PM
1000 Series : Calibration & Verification of the 1000 Series
Transmille have provided a calibration guide for the 1000 Series that can be downloaded either from our main website or from the bottom of this support tick...
Tue, 9 Apr, 2019 at 8:19 AM
1000 Series : Downloading calibration factors
It may sometimes be necessary to perform a backup of the calibration factors of the 1000 Series, for instance to keep a copy of previous factors prior to se...
Tue, 2 Mar, 2021 at 2:21 PM
1000 Series : Uploading/Restoring Calibration Factors
If the need arises, the 1000 Series can have calibration factors loaded back in via the USB port and using the Transmille Calibrator Setup Utility. For inst...
Tue, 2 Mar, 2021 at 2:23 PM
1000 Series : Changing Line Input Voltage Selection
The 1000 Series has a configurable input voltage, either 110V or 230V. 100V input is available on special request. This procedure can be performed by en...
Tue, 2 Mar, 2021 at 2:26 PM
1000 Series : Writing and Uploading Procedures
The 1000 Series has the ability to have procedures uploaded into internal memory and run from the front panel. To write and upload procedures, the Free ...
Tue, 2 Mar, 2021 at 2:26 PM
1000 Series - Dismantling Instructions
On occasion dismantling the 1000 Series will be required to access internal fuses or to replace components during repair. These instructions are common to ...
Tue, 2 Mar, 2021 at 2:32 PM