3000A Series
For the protection of both Transmille and our representatives our products are fitted with a security code which prevents equipment being used beyond the ...
Wed, 15 Jun, 2016 at 4:32 PM
The 3000A Series calibrator contains a set of calibration factors / constants that determine and control the output of the calibrator.
It is common ...
Fri, 22 Jul, 2016 at 10:15 AM
NOTE : ONLY PERFORM THIS PROCEDURE WITH PRIOR AUTHORISATION FROM TRANSMILLE OR OUR APPROVED AGENTS ANY DAMAGE CAUSED BY FOLLOWING THIS PROCEDURE INCO...
Fri, 2 Sep, 2016 at 9:51 AM
To assist Transmille diagnose any faults as quickly as possible, we have prepared a short diagnosis sheet which can be filled out which covers key poin...
Wed, 12 Oct, 2016 at 11:37 AM
During the working life of a 3000A Series Calibrator, it is quite normal for adjustments to be performed to remain within nominal specifications This pr...
Wed, 21 Dec, 2016 at 12:38 PM
Occasionally the output protection fuses on the 3000 / 3000A Series calibrators may require replacement. This procedure can be performed by the end user, me...
Tue, 11 Sep, 2018 at 9:47 PM
1) Download the USB Updater application attached to this solution. 2) Start the ds30 Secure Loader GUI utility, and select the appropriate COM port for ...
Fri, 27 Oct, 2017 at 5:21 PM
To verify the oscilloscope amplitude output of the 3000A series multi-product calibrator, the following procedure should be followed. Select Scope Func...
Fri, 18 May, 2018 at 2:17 PM
To update the 3000A Series Multiproduct calibrator there are two types of update. To perform a low-level firmware update, a programmer from Transmille i...
Tue, 11 Dec, 2018 at 12:18 PM
The 3000A can be used with a wide arrange of external adapters, including options for measurement of Pressure and Torque As each transducer is unique, c...
Mon, 8 Apr, 2019 at 5:01 PM