ProSet

Adding a new Standard into ProSet (prior to V6.8)
In a laboratory it is normal to have a set of standards, whether that is a single current shunt or an oil bath full of standard resistors. ProSet al...
Mon, 6 Sep, 2021 at 8:39 AM
Configuring Custom Certificate Templates (For ProCal)
If you print certificates via ProCal-Track, please see this guide instead: ProCal-Track Using A Custom Certificate ProSet enables users to set a default...
Thu, 15 Apr, 2021 at 8:33 AM
Configuring Laboratory Address & Signatories
The address details that appear on certificates and other documents are configured using ProSet if you are using the In Built certificate format or using da...
Thu, 15 Apr, 2021 at 8:25 AM
Configuring Traceable Instruments (prior to ProCal V6.8)
Please follow the steps below to set up your calibration equipment as traceable instruments within ProSet for use in ProCal: Access the traceable instr...
Tue, 14 Sep, 2021 at 11:49 AM
Deleting a standard from ProSet (prior to V6.8)
From time to time it may be necessary to remove a standard from ProSet as it is no longer in use. To remove the standard, there are two options :  1...
Mon, 6 Sep, 2021 at 8:39 AM
Numbering Scheme Locking System
As of version 6.5.11, ProSet features a new numbering scheme locking system. This system is designed to prevent duplication when generating System ID, Job a...
Fri, 8 Mar, 2019 at 2:08 PM
ProSet - MSADODC.ocx Error
If you receive this error while running ProSet, please follow these steps: Download the file attached to this article Unzip the contents to "C:...
Thu, 1 Feb, 2018 at 7:59 AM
Updating Traceability Information of Reference Standards (prior to ProSet V6.7)
In order for ProCal to control instruments and/or record information about instruments used for a calibration, these instruments need to be added to the sys...
Wed, 8 Sep, 2021 at 7:03 AM