Calibrator (1000, 3000A, 4000 and 9000A) General

Installing the Transmille Calibrator Setup Utility
Transmille provide a free of charge desktop utility that allows users to configure settings and download/restore the calibration factors from the 1000, 3000...
Fri, 1 Mar, 2019 at 11:30 AM
Changing the High Voltage Timeout
The Transmille 1000, 3000A, 4000 and 9000A units ship with the High Voltage output limited to 20 minutes for safety reasons. If required, users can disa...
Wed, 1 May, 2019 at 12:51 PM
Changing / Setting the High Voltage Limit
The 1000, 3000A, 4000 and 9000A have a user configurable high voltage limit. This can be set to limit the maximum voltage that the calibrator is capable...
Wed, 1 May, 2019 at 12:55 PM
Entering the Unlock Code
Transmille products are protected by an unlock code when shipped from the factory. This is for protection of both ourselves and our representatives/reseller...
Wed, 1 May, 2019 at 2:36 PM
Adjusting the High Voltage Current Limit
The Transmille 1000, 3000A, 4000 and 9000 Series calibrators are fitted with a safety feature to prevent the possibility of harm when outputting high voltag...
Wed, 12 Jun, 2019 at 3:55 PM
Service Note : Replacing AC High Voltage Divider Chain (30XX, 40XX, 90XX Calibrators)
Note - This modification is only required for units that have older individual resistors that have failed due to component failure outside of Transmille...
Tue, 18 Jun, 2019 at 11:09 AM