4000 Series

4000 : Exporting a procedure from ProEdit in 4000 Series Format
Procedures can be uploaded to the 4000 Series via a USB stick from the front panel USB port. To ease writing procedures, ProEdit is used to write proced...
Tue, 16 Oct, 2018 at 8:52 AM
4000 : Importing Procedures from USB Device Port
 Procedures can be uploaded to the 4000 Series via USB stick from the front panel USB Port (USB Device Port) After writing and exporting a procedure (mo...
Tue, 16 Oct, 2018 at 8:53 AM
4000 : Formatting a Memory Stick to FAT32 Format (4000 Series)
To be detected by the 4000 Series any memory stick used must be formatted using the FAT32 File System. To format a memory stick to this file system, fir...
Tue, 16 Oct, 2018 at 8:53 AM
4000 : Updating Low Level Firmware Via USB
1) Connect a USB cable to the rear of the 4000 Series. Ensure that the FTDI drivers are installed on your computer. 2) Download the USB Updater applicat...
Tue, 3 Jul, 2018 at 10:57 AM
4000 : Activating Remote Sense for Voltage
The 4000 Series is available with an option for remote sensing voltage. This features allows compensation for external loads which is especially importa...
Sat, 15 Dec, 2018 at 2:38 PM
4000 : Exporting Calibration Backup Files
Starting with UI Version 3.1.2 it is possible to export the backup files that are stored internally to the 4000 Series via the front mounted USB Port. T...
Thu, 7 Feb, 2019 at 10:58 AM
4000 : Entering Recovery Mode
If an update of the UI is interrupted (for example a power interruption) there is the possibility for the calibrator to display an error and not reach the m...
Fri, 21 Aug, 2020 at 2:20 PM