Updating Firmware via USB (Versions 13.1.xx onwards)

Modified on Tue, 02 Mar 2021 at 02:50 PM

1) Download the USB Updater application attached to this solution.


2) Start the ds30 Secure Loader GUI utility, and select the appropriate COM port for the calibrator, ensure that baud rate is set to 9600.


3) Select the 3000A_Series_XXX_encrypted.hex where XXX is the latest version of the Low Level firmware.


4) Ensure that 'Write Flash' is ticked, Device 'PIC24HJ' is selected and '256GP610' is selected in the dropdown box.



5) Turn on power to the 3000A Series, and then press the 'Write' button. This must be done within approximately 1 second.


6) A progress bar will indicate the update progress, this process takes approximately 3 minutes.


7) The calibrator will restart and is now ready for operation.


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article